Stump Cutters
CE compliant
SC362 Stump Cutter
Developed with rental yards and tree care contractors in mind.
Vermeer
⤢ Zoom
At a glance
- Gross Horsepower (Maximum)
- 26.1 kw 35 hp
Features & benefits
- Designed for maneuverability and efficiency
- Simplicity that enables productivity
- Built for ease of maintenance
Technical data
Specifications
| Length - Tongue In | cm in |
|---|---|
| Length - Tongue Extended | cm in |
| Length | 279.4 cm 110 in |
| Width | 126.5 cm 49.8 in |
| Width (tracks retracted) | cm in |
| Width (tracks extended) | cm in |
| Height | 134.6 cm 53 in |
| Height (non-remote unit) | cm in |
| Height (remote unit) | cm in |
| Overall Width Transport (without duals) | 88.9 cm 35 in |
| Overall Width Transport (with duals) | 126.5 cm 49.8 in |
| Overall Height Transport | 134.6 cm 53 in |
| Overall Height Transport - Engine Option Two | cm in |
| Weight - Engine Option One | 598.7 kg 1320 lbs |
| Weight - Engine Option Two | kg lbs |
| Weight - Engine Option Three | kg lbs |
| Tongue Weight - Engine Option One | kg lbs |
| Tongue Weight - Engine Option Two | kg lbs |
| Tongue Weight - Engine Option Three | kg lbs |
| Weight With Dual Wheel Option (Additional ) | kg lbs |
| Width with Dual Wheel Option (Additional) | cm in |
| Weight with Four Wheel Drive and Chip Blade (Additional) | kg lbs |
| Weight With Chip Blade Option (Additional) | kg lbs |
| Sound Power | 106 |
| Sound Power - Engine Option Two | — |
| Sound Power - Engine Option Three | — |
| Make and Model | Briggs & Stratton Vanguard |
|---|---|
| Number of Cylinders | — — |
| Gross Horsepower (Maximum) | 26.1 kw 35 hp |
| Torque (Max) | 71.9 Nm 53 ft-lb |
| Fuel Tank Capacity | 22.7 L 6 gal |
| Max Fuel Consumption | 12.1 lph 3.2 gph |
| Fuel Type | Gasoline |
| Air Cleaner | Dry-type safety element and restriction indicator |
| Oil Filter | Spin-on |
| Recommended Oil | 10W30 (See engine manual) |
| Oil Volume with Filter | 1.9 L 2 qt |
| Maximum Angle of Continuous Operation | — deg |
| Cooling Medium | Air |
| Coolant Capacity (Engine and Radiator) | L gal |
| Alternator | 20 amp |
| Fan | — |
| Clutch Type | Electric clutch with brake |
| Make and Model | — |
|---|---|
| Number of Cylinders | — — |
| Gross Horsepower (Maximum) | kw hp |
| Torque (Max) | Nm ft-lb |
| Fuel Tank Capacity | L gal |
| Max Fuel Consumption | lph gph |
| Fuel Type | — |
| Air Cleaner | — |
| Oil Filter | — |
| Recommended Oil | — |
| Oil Volume with Filter | L qt |
| Maximum Angle of Continuous Operation | — deg |
| Cooling Medium | — |
| Coolant Capacity (Engine and Radiator) | L gal |
| Alternator | — |
| Fan | — |
| Clutch Type | — |
| Make and Model | — |
|---|---|
| Number of Cylinders | — — |
| Gross Horsepower (Maximum) | kw hp |
| Torque (Max) | Nm ft-lb |
| Fuel Tank Capacity | L gal |
| Max Fuel Consumption | lph gph |
| Fuel Type | — |
| Air Cleaner | — |
| Oil Filter | — |
| Recommended Oil | — |
| Oil Volume with Filter | L qt |
| Maximum Angle of Continuous Operation | — deg |
| Cooling Medium | — |
| Coolant Capacity (Engine and Radiator) | L gal |
| Alternator | — |
| Fan | — |
| Clutch Type | — |
| Clutch Drive Engagement | — |
| Cutterwheel Diameter | 43.2 cm 17 in |
|---|---|
| Cutterwheel Diameter without Teeth | cm in |
| Cutterwheel Thickness | 1.3 cm .5 in |
| Cutterwheel Speed | — 1400 rpm |
| Cutterwheel Straight Line Dimension | 119.4 cm 47 in |
| Cutterwheel Cut Above Ground | 61 cm 24 in |
| Cutterwheel Cut Below Ground | 38.1 cm 15 in |
| Tooth Description | Yellow Jacket™ cutter system |
| Number of Teeth | 16 |
| Number of Indexes | 2 |
| Number of Pockets | 16 |
| Number of wear plates | — |
| Reversible Pockets/Teeth | 16 |
| Cutterwheel Guard | Standard |
| Chip Containment | .2 cu m 7.7 cu ft |
| Cutterwheel Diameter without Teeth | cm in |
|---|---|
| Cutterwheel Thickness | cm in |
| Cutterwheel Speed | — rpm |
| Cutterwheel Straight Line Dimension | cm in |
| Cutterwheel Cut Above Ground | cm in |
| Cutterwheel Cut Below Ground | cm in |
| Tooth Description | — |
| Number of Teeth | — |
| Cutterwheel Guard | — |
| Number of Indexes | — |
| Number of Pockets | — |
| Reversible Pockets/Teeth | — |
| Chip Containment | cu m cu ft |
| Upper Gearbox | — |
|---|---|
| Oil Type | — |
| Oil Capacity | L qt |
| Lower Gearbox | — |
| Oil Type - Lower Gearbox | — |
| Oil Capacity - Lower Gearbox | L qt |
| Driveshaft | — |
| Driveshaft - U Joints | — |
| Belt Type | V-Belt |
| Number of Primary Belts | 2 individual (matched pair) |
| Jackshaft Dimension | 1.3 |
| Jackshaft Bearing Type | Sealed ball |
| Bearing Dimensions | 1.3 bore |
| Dynamic Capacity | kg lbs |
| Number of Secondary Belts | 6 Banded |
| Cutterwheel Shaft | 1.8" (4.8 cm) |
| Bearing Dimensions - Secondary Belt | 1.8" (4.8 cm) double spherical roller pillow block |
| Dynamic Capacity - Secondary Belt | kg lbs |
| Tank capacity | 15.1 L 4 gal |
|---|---|
| Recommended Oil Type | Vermeer HyPower 68 |
| System Type | Open-loop series system |
| Filtration Method | Pump suction strainer (100 mesh) and 6 micron return filter |
| Pump Flow at Maximum RPM | 14 L/min 3.7 gpm |
| System relief pressure | 140 bar 2030 psi |
| Flow Control | AutoSweep® (option) or 2 speed ground drive |
| Directional Control | Manual hydraulic value |
| Oil Cooler | — |
| Tank capacity | L gal |
|---|---|
| Recommended Oil Type | — |
| System Type | — |
| Filtration Method | — |
| Pump Flow at Maximum RPM | L/min gpm |
| System relief pressure | bar psi |
| Flow Control | — |
| Directional Control | — |
| Oil Cooler | — |
| System Voltage | 12 V |
|---|---|
| Battery | 400 CCA |
| Standard Gauges | Hourmeter |
| Deluxe Gauges | — |
| Warning Lights | Operator presence status, clutch engage/disengagement status |
| Switches | Two-speed ground drive, clutch engage/disengage, operator presence handles |
| Controller | Vermeer ACS |
| Display | — |
| Shutdown System | Engine low oil pressure |
| Radio Remote Control | — |
| Frame Description | Welded tube and plate steel |
|---|---|
| Control Station Description | Fixed side location |
| Operator Vision Shield Description | — |
| Toolbox Description | Standard |
| Tongue Description | — |
| Tongue Extension | — |
| Hitch Type | — |
| Steerable Axle Type | Hydraulic steering, oscillating axle |
| Degree of Oscillation | — deg |
| Turning Radius | — deg |
| Tires - Option One | 5.7" x 8" (14.5 x 20.3 cm) duals standard |
| Wheels - Option One | — |
| Fender Description | Yes |
| Axle/Suspension | Rigid/Fixed (Rear) |
| Type - Option One | — |
| Manufacturer - Option One | — |
| Capacity - Option One | — |
| Tires - Standard | — |
| Tires - Floatation | — |
| Wheels - Standard | — |
| Wheels - Floatation | — |
| Brake Type | — |
| Trailer Light Type | — |
| Track Frame Description | — |
|---|---|
| Track Type | — |
| Track Width - Retracted | — |
| Track Width - Extended | — |
| Track Length on Ground | — |
| Type of Idler | — |
| Number of Idlers | — — |
| Track Drive Pump Type | — |
| System Relief Pressure | — |
| Pump Flow at Maximum RPM | — |
| Track Drive Motor Type | — |
| Track Brake Type | — |
| High Speed Travel | km/h mph |
| Low Speed Travel with Boost Assist | km/h mph |
| Low Speed Travel | km/h mph |
| Low Speed Travel in Creep Mode | km/h mph |
| Ground Bearing Pressure - Soft Ground | kPa psi |
| Ground Bearing Pressure - Hard Ground | kPa psi |
| Low Speed Travel | 20.1 m/min 66 ft/min |
|---|---|
| Low Speed Travel - Engine Option Two | m/min ft/min |
| High Speed Travel | 40.5 m/min 133 ft/min |
| High Speed Travel - Engine Option Two | m/min ft/min |
| Chip Blade Dimension | — |
|---|---|
| Chip blade width (without extensions) | cm in |
| Blade Travel Above Ground | cm in |
| Blade Travel Below Ground | cm in |
| Bumper | — |
| Radio Remote Control | — |
|---|---|
| Remote Functions | — |
| Remote Display | — |
| Remote Range | — |
| Special Paint | — |
|---|---|
| Extended Warranty | — |
| Preventive Maintenance | — |
| Hydraulically Engaged Clutch | — |
| Description | — |
|---|---|
| Sensor Type | — |
| Quantity/Location | — |
| Visual Interface | — |
Videos
Related models
All in Stump Cutters →
CE
SC292 Stump Cutter
Contractors can now fit into tighter spaces for more efficient stump grinding.
- Gross Horsepower (Maximum)
- 19.8 kw 26.5 hp
CE
CE
