Brush Chippers
Conform CE
BC200 Brush Chipper
The BC200 is built tough to support your daily business and surpass expectations.
Vermeer
⤢ Mărește
Pe scurt
- Gross Horsepower (Maximum)
- 33 kw 44.3 hp
Caracteristici & beneficii
- EN 13525-compliant
- Stage V compliant engines
- Clutchless disc drive
- Twin horizontal feed rollers with offset
Broșuri & fișe tehnice
Date tehnice
Specificații tehnice
| Length - Feed Table Up, Tongue In | 376.9 cm 148.4 in |
|---|---|
| Length - Table Down, Tongue Extended | 435.1 cm 171.3 in |
| Length - Tongue In | cm in |
| Length - Tongue Extended (Additional) | cm in |
| Width | 157.5 cm 62 in |
| Height | 251.5 cm 99 in |
| Weight (without winch and hydraulic jack) | kg lbs |
| Weight (with winch, hydraulic jack and hydraulic chute) | kg lbs |
| Weight with outriggers (additional) | kg lbs |
| Weight - Engine Option One | 1496.9 kg 3300 lbs |
| Weight - Engine Option Two | 1465.1 kg 3230 lbs |
| Weight - Engine Option Three | kg lbs |
| Weight - Engine Option Four | kg lbs |
| Tongue Weight - Engine Option One | 90.7 kg 200 lbs |
| Tongue Weight - Engine Option Two | 81.6 kg 180 lbs |
| Tongue Weight - Engine Option Three | kg lbs |
| Length with Winch (Additional) | cm in |
| Weight With Winch (Additional) | kg lbs |
| Weight With Loader (Additional) | kg lbs |
| Weight With Steel Tracks (Additional) | kg lbs |
| Sound Power | 126 dB(A) |
| Sound Power - Engine Option Two | 117 dB(A) |
| Sound Power - Engine Option Three | — |
| Horsepower Options | — |
| Make and Model | Kubota V1505-CR-TES |
|---|---|
| Number of Cylinders | — 4 |
| Gross Horsepower (Maximum) | 33 kw 44.3 hp |
| Torque (Max) | 119.3 Nm 88 ft-lb |
| Fuel Tank Capacity | 39.7 L 10.5 gal |
| Max Fuel Consumption | 7.6 lph 2 gph |
| Fuel Type | Ultra-low sulfur diesel acc. EN 590 / ASTM D975 |
| Air Cleaner | Donaldson 2 Stage Dry |
| Oil Filter | Spin-on |
| Recommended Oil | CJ-4, CK-4 |
| Oil Volume with Filter | 6.8 L 7.2 qt |
| Maximum Angle of Continuous Operation | — 20 deg |
| Cooling Medium | Liquid |
| Coolant Capacity (Engine and Radiator) | 7.9 L 2.1 gal |
| Alternator | 60 amps Kubota |
| Fan | 400 mm suction |
| Clutch Type | Direct drive |
| Clutch Drive Engagement | Direct drive |
| Make and Model | Kubota WG1605 |
|---|---|
| Weight | kg lbs |
| Tongue Weight | kg lbs |
| Number of Cylinders | — 4 |
| Gross Horsepower (Maximum) | 42.5 kw 57 hp |
| Torque (Max) | 111.2 Nm 82 ft-lb |
| Fuel Tank Capacity | 39.7 L 10.5 gal |
| Max Fuel Consumption | 6.8 lph 1.8 gph |
| Fuel Type | Unleaded gasoline 95 Octane max 10% methanol |
| Air Cleaner | Donaldson 2 Stage Dry |
| Oil Filter | Spin-on |
| Recommended Oil | SI Multigrade SAE 10W or SAE 10W-30 |
| Oil Volume with Filter | 6 L 6.3 qt |
| Maximum Angle of Continuous Operation | — 20 deg |
| Coolant Capacity (Engine and Radiator) | 7.9 L 2.1 gal |
| Cooling Medium | Liquid |
| Alternator | 40 amps Kubota |
| Fan | 400 mm suction |
| Clutch Type | Direct drive |
| Clutch Drive Engagement | Direct drive |
| Make and Model | — |
|---|---|
| Weight | kg lbs |
| Tongue Weight | kg lbs |
| Number of Cylinders | — — |
| Gross Horsepower (Maximum) | kw hp |
| Torque (Max) | Nm ft-lb |
| Fuel Tank Capacity | L gal |
| Max Fuel Consumption | lph gph |
| Fuel Type | — |
| Air Cleaner | — |
| Oil Filter | — |
| Recommended Oil | — |
| Oil Volume with Filter | L qt |
| Maximum Angle of Continuous Operation | — deg |
| Cooling Medium | — |
| Coolant Capacity (Engine and Radiator) | L gal |
| Alternator | — |
| Fan | — |
| Clutch Type | — |
| Clutch Drive Engagement | — |
| Make and Model | — |
|---|---|
| Number of Cylinders | — — |
| Gross Horsepower (Maximum) | kw hp |
| Torque (Max) | Nm ft-lb |
| Fuel Type | — |
| Air Cleaner | — |
| Fuel Tank Capacity | L gal |
| Oil Filter | — |
| Recommended Oil | — |
| Oil Volume with Filter | L qt |
| Cooling Medium | — |
| Coolant Capacity (Engine and Radiator) | L gal |
| Alternator | — |
| Fan | — |
| Clutch Type | — |
| Power | kw hp |
|---|---|
| Voltage | — |
| Phase | — |
| Enclosure | — |
| Full Load Amps | — |
| Full load RPM | — rpm |
| Power | kw hp |
|---|---|
| Voltage | — |
| Phase | — |
| Enclosure | — |
| Full Load Amps | — |
| Full load RPM | — rpm |
| Power | kw hp |
|---|---|
| Voltage | — |
| Phase | — |
| Enclosure | — |
| Full Load Amps | — |
| Full load RPM | — rpm |
| Power | kw hp |
|---|---|
| Voltage | — |
| Phase | — |
| Enclosure | — |
| Full Load Amps | — |
| Full load RPM | — rpm |
| Feed Roller Orientation | Horizontal, offset lower |
|---|---|
| Number of Feed Rollers | 2 |
| Feed Roller Clamp Load | 399.2 kg 880 lbs |
| Feed Roller Clamp Type | Spring |
| Feed Roller Minimum Distance to Drum | 11.9 cm 4.7 in |
| Feed Roller Dimension | 16 in (40 cm) |
| Number of Knives | — 12 |
| Weight of Feed Roller | 34.9 kg 77 lbs |
| Feed Roller Dimension (Two) | 10 in (26 cm) |
| Number of Knives (2) | — 12 |
| Weight of Feed Roller (Option Two) | 20 kg 44 lbs |
| Number of Feed Roller Motors | 2 |
| Motor Displacement | Upper: 465 cc, Lower: 300 cc |
| Motor Manufacturer | Danfoss |
| Feed Speed | — 124 ft/min |
| Motor displacement (option two) | — |
| Motor manufacturer (option two) | — |
| Feed speed (option two) | m/min ft/min |
| Infeed Table Width | 114.3 cm 45 in |
| Infeed Table Length | 71.1 cm 28 in |
| Infeed Hopper Height | 78.7 cm 31 in |
| Infeed Throat Capacity | 8 in x 12 in (20 cm x 30 cm) |
| Pinch Point - Distance to End of Feed Table | 149.9 cm 59 in |
| Distance from Feed Table to Ground | 71.1 cm 28 in |
| Infeed Table Material Thickness | .3 cm .1 in |
| Bottom Feed Stop Bar | Floating, spring return |
|---|---|
| Bottom Feed Stop Bar Diameter | 3.2 cm 1.3 in |
| Bottom Feed Stop Bar Material Thickness | 0.12 in (3.2 mm) |
| Actuation Force (BFSB) | 15 kg 33 lbs |
| Normal Sensitivity | — deg |
| Reduced Sensitivity | — deg |
| Reset Method | Push button |
| Four Position Feed Control Bar | — |
| Diameter | cm in |
| Material Thickness | cm in |
| Positions | — |
| Actuation Force | kg lbs |
| Green Hold to Run Button | — |
| Material Capacity | 20.3 cm 8 in |
|---|---|
| Width | 30.5 cm 12 in |
| Thickness | 2.5 cm 1 in |
| Diameter | 76.2 cm 30 in |
| Speed | 1365 rpm |
| Weight With Shaft | 108.9 kg 240 lbs |
| Safety Lock - Number of Positions | 4 |
| Number of Knives | — 4 |
| Knife Thickness | 1.6 cm .6 in |
| Material | A8 Chipper Steel |
| Useable Edges | 2 |
| Knife Size | 5 x 5 in (12.7 x 12.7 cm) |
| Number of Bolts/Knife | 2 |
| Replaceable Threaded Knife Block | — |
| Number of Paddles | 4 |
| Fixture Method | Welded |
| Air Flow | — 900 cfm |
| Bedknife Size | Upper: 7.9 x 5.1 in (20 x 13 cm), Lower: 10.6 x 5.1 in (27 x13 cm) |
| Bedknife Thickness | 1.9 cm .8 in |
| Bedknife Material | S355J2 |
| Bedknife - Number of Useable Edges | 2 |
| Number of Bearings | — 2 |
|---|---|
| Bore | 5.6 cm 2.2 in |
| Type | Dual spherical roller |
| Manufacturer | Timken |
| Dynamic Capacity | 14741.8 kg 32500 lbs |
| Static Capacity | 20139.5 kg 44400 lbs |
| Belt Idler/Tensioner | Idler arm, manually adjusted |
| Belt Type | 3 rib, Classic B profile, Aramid Cord Construction |
| Number of Bearings | — — |
|---|---|
| Bore | cm in |
| Type | — |
| Manufacturer | — |
| Dynamic Capacity | kg lbs |
| Static Capacity | kg lbs |
| Belt Idler/Tensioner | — |
| Belt Type | — |
| Number of Bearings | — — |
|---|---|
| Bore | cm in |
| Type | — |
| Manufacturer | — |
| Dynamic Capacity | kg lbs |
| Static Capacity | kg lbs |
| Belt Idler/Tensioner | — |
| Belt Type | — |
| Chute Height | 251.5 cm 99 in |
|---|---|
| Bottom Thickness | .3 cm .1 in |
| Top Thickness | .3 cm .1 in |
| Side Wall Thickness | .3 cm .1 in |
| Deflector Thickness | .2 cm .1 in |
| Chute Rotation Angle | — 270 deg |
| Rotation Type | Manual |
| Rotational Lock | Spring pin |
| Tank capacity | 22.7 L 6 gal |
|---|---|
| Recommended Oil Type | Shell Tellus 68 |
| System Type | Fixed flow, open circuit |
| Filtration Method | Suction: 100 Mesh, Return: 10 Micron |
| Pump Flow at Maximum RPM | 15.1 L/min 4 gpm |
| System relief pressure | 172.4 bar 2500 psi |
| Auto Reverse PSI | 158.6 bar 2300 psi |
| Flow Control | — |
| Directional Control | 12 V solenoid controlled |
| Oil Cooler | — |
| System Voltage | 12V |
|---|---|
| Battery | 12V dC, 77A/h, 760 CCA |
| Standard Gauges | — |
| Deluxe Gauges | — |
| Switches | Pizzato |
| Controller | MPC12 |
| Display | MPC12 |
| Shutdown System | Kubota ECU |
| Radio Remote Control | — |
| Frame Description | Ladder frame chassis, C-shaped rails |
|---|---|
| Toolbox Description | — |
| Tongue Description | Bolt-on, square tube |
| Tongue Extension | — |
| Hitch Type | Alko 161S - 50-mm ball coupler |
| Fender Description | Bolt-on plastic |
| Axle/Suspension | Rubber torsion |
| Type - Option One | Alko Plus 1800 |
| Manufacturer - Option One | Alko |
| Capacity - Option One | 3970 lb (1800 kg) |
| Tires - Option One | 185R14C |
| Wheels - Option One | 5,5JX14 ET30 5 x 112 |
| Axle/Suspension - Option Two | — |
| Type - Option Two | — |
| Manufacturer - Option Two | — |
| Capacity - Option Two | — |
| Tires - Option Two | — |
| Wheels - Option Two | — |
| Axle/Suspension - Option Three | — |
| Type - Option Three | — |
| Manufacturer - Option Three | — |
| Capacity - Option Three | — |
| Tires - Option Three | — |
| Wheels - Option Three | — |
| Brake Type | 8 in x 2 in (200 mm x 50 mm) drum, surge brake activated |
| Trailer Light Type | 13-pin connector, LED lights |
| Track Frame Description | — |
|---|---|
| Track Type | — |
| Track Width | — |
| Track Length on Ground | — |
| Type of Idler | — |
| Number of Idlers | — — |
| Track Drive Pump Type | — |
| Pump Flow at Maximum RPM | — |
| System Relief Pressure | — |
| Track Drive Motor Type | — |
| Track Brake Type | — |
| High Speed Travel | km/h mph |
| Low Speed Travel | km/h mph |
| Ground Bearing Pressure - Soft Ground | kPa psi |
| Ground Bearing Pressure - Hard Ground | kPa psi |
| Length | cm in |
|---|---|
| Width | cm in |
| Height | cm in |
| Weight | kg lbs |
| Winch Relief System | bar psi |
|---|---|
| Winch Boom Structure | — |
| Winch Input Speed | — rpm |
| Winch Controls | — |
| Winch Rope | — |
| Rope Length | m ft |
| Rope Line Pull | kg lbs |
| Rope Choker | — |
| Special Paint | Available |
|---|---|
| Extended Warranty | Available |
| Preventive Maintenance | Available |
| Adjustable Height Discharge Chute | — |
| Hydraulically Engaged Clutch | — |
| Remote Control | — |
| Hydraulic Outriggers | — |
| Hydraulic Chute Controls | — |
| Loader Relief Pressure | bar psi |
|---|---|
| Loader Boom Structure | — |
| Loader Reach | m ft |
| Loader Lift Capacity at Full Reach | kg lbs |
| Loader Maximum Lift Capacity | kg lbs |
| Loader Controls | — |
| Loader Rotation | — |
| Loader Grapple Rotation | — |
| Length - Feed Table Up, Tongue In | 414 cm 163 in |
|---|---|
| Length - Table Down, Tongue Extended | 472.4 cm 186 in |
| Width | 166.9 cm 65.7 in |
| Height | 264.2 cm 104 in |
| Weight (without winch and hydraulic jack) | 1809.8 kg 3990 lbs |
| Weight - Engine Option One | 1809.8 kg 3990 lbs |
| Tongue Weight - Engine Option One | 99.8 kg 220 lbs |
| Distance from Feed Table to Ground | 78.7 cm 31 in |
| Chute Height | 264.2 cm 104 in |
| Frame Description | Ladder frame chassis, s-shaped rails |
| Hitch Type | Alko 251S - 50-mm ball coupler |
| Type - Option One | Alko 1350 |
| Manufacturer - Option One | Alko |
| Capacity - Option One | 2,980 lbs (1,350 kg) per axle |
| Tires - Option One | 195/50R13 C8 |
| Wheels - Option One | 6JX13H2 ET30 5X112 |
| Length - Feed Table Up, Tongue In | 454.7 cm 179 in |
|---|---|
| Length - Table Down, Tongue Extended | 513.1 cm 202 in |
| Width | 166.9 cm 65.7 in |
| Height | 264.2 cm 104 in |
| Weight (without winch and hydraulic jack) | 1841.6 kg 4060 lbs |
| Weight - Engine Option One | 1841.6 kg 4060 lbs |
| Tongue Weight - Engine Option One | 108.9 kg 240 lbs |
| Distance from Feed Table to Ground | 78.7 cm 31 in |
| Chute Height | 264.2 cm 104 in |
| Frame Description | Ladder frame chassis, s-shaped rails |
| Hitch Type | Alko 251VB - 50-mm ball coupler or 40-mm DIN-eye |
| Type - Option One | Alko 1350 |
| Manufacturer - Option One | Alko |
| Capacity - Option One | 2,980 lbs (1,350 kg) per axle |
| Tires - Option One | 195/50R13 C8 |
| Wheels - Option One | 6JX13H2 ET30 5X112 |
Video
Modele similare
Toate din Brush Chippers →
CE
BC230 Brush Chipper
The BC230 is built tough to support your daily operations and surpass expectations.
- Gross Horsepower (Maximum)
- 55.2 kw 74 hp
CE
BC1000XL European Configuration Brush Chipper
The heavy-duty Vermeer BC1000XL brush chipper with its all-steel engine enclosure is designed to hold up for the long haul.
- Gross Horsepower (Maximum)
- 55.2 kw 74 hp
